Parts for Kenmore Models 6543 REV D

Dishwasher heating element (heater)

The heating element is used to create heat during the dry cycle and increase water temperature during portions of the wash cycle when certain options are selected. If your dishes are not drying or the water in the dishwasher is not getting hot you may need to replace the element. This kit includes the heater, two heater fasteners, and is a genuine OEM part. Please remember to disconnect the power before starting the repair.

Easy Part #:: EAP8260087

Availability:: In Stock

Price:: $51.85

Main electronic control board (board asm main control)

This board controls the operation of the unit and is located on the back of the refrigerator. The defrost controls are built-in to the control board. If your refrigerator is too hot or cold, will not defrost, runs to long, or the ice maker will not work, you may need to replace the control board. Note: This is a genuine OEM part and has been updated by the manufacturer. It may differ in appearance but will function the same as the original.

Easy Part #:: EAP2364946

Availability:: On Order

Price:: $338.03

Wheel & bushing ass (use 5300809640)

The single rack roller kit comes with one axle/clip and one wheel/roller. The rack wheel is designed to allow the rack of your dishwasher to roll in and out. If the rack will not complete this task, or you notice that your dishwasher is not cleaning dishes properly, you may need to replace the rack wheel. The single rack roller kit is made of white plastic, and clips to the dishwasher rack with the included axle/clip. Many of our customers have described this repair as easy, and you will not require any tools to complete it. Lower rack roller and bracket assembly, grey. Wheel has been updated. If wheel pictured is not like old one, you may need to replace all wheels.

Easy Part #:: EAP16745479

Availability:: In Stock

Price:: $6.31

Drum belt (use 134163400)

This dryer drum belt is 88 3/4 inches long, and is 1/4 inch wide. The belt attaches to the motor pulley and helps rotate the drum as the motor rotates. If the drum does not rotate and you can still hear the motor running, the belt may have broken and will need to be replaced. This is a genuine OEM part. Please remember to disconnect the power to your dryer before starting the repair.

Easy Part #:: EAP1148434

Availability:: In Stock

Price:: $16.26

Refrigerator door gasket (refrigerator door gasket (white))

This white door gasket is used to make an air-tight seal for the cabinet when the door is closed to keep the cool air inside and prevent warm air from entering. This is a genuine OEM part.

Easy Part #:: EAP2331952

Availability:: In Stock

Price:: $98.96

Blower wheel with clamp (blower wheel assembly)

This blower wheel comes with a metallic hub clamp to hold it firmly in place.

Easy Part #:: EAP2200270

Availability:: In Stock

Price:: $19.07

Hex head bolt (washer hex bolt for inner tub flange and shaft assembly.)

This part is used for the shaft on rear of the tub. Sold individually.

Easy Part #:: EAP4205366

Availability:: In Stock

Price:: $11.11

Lint filter - white frame (trap lint)

The lint filter is used to collect lint and debris as it passes through the dryer vent. It is recommended to clean the lint filter before every load. If your dryer takes too long to dry, the lint filter frame becomes damaged or the filter has torn you may need to replace the lint filter. The frame is white in color. This is a genuine OEM part.

Easy Part #:: EAP11767017

Availability:: In Stock

Price:: $65.06

Drip bowl - 8 inch (use wpl 4329225)

This eight-inch chrome drip bowl is intended for use with rolled terminal style plug-in surface element units. The drip bowl sits under the burner to catch anything that may spill over to make cleaning up spills quick. This is a genuine OEM part and is sold individually.

Easy Part #:: EAP2366563

Availability:: In Stock

Price:: $10.03

Timer knob (timer knob wh/chr)

This timer knob is white with a silver trim, and is roughly 3 inches in diameter. It accepts a D-shaped shaft.

Easy Part #:: EAP1482197

Availability:: In Stock

Price:: $31.22

Surface burner plug-in block kit (kit, top element term)

This newer-style terminal block kit includes two metal brackets, two pre-crimped wires with terminals, two ceramic wire nuts, a heat shrinking tube, and a mounting screw. This part is used to connect the wire harness to the surface burner element. If your element will not heat at all, or if it is not heating properly, it is likely an issue with the terminal block and it will need to be replaced. This is a genuine OEM part. Please remember to disconnect the power supply before starting your repair.

Easy Part #:: EAP340571

Availability:: In Stock

Price:: $12.49

Water valve with guard (water valve)

This double inlet water valve has quick connections. This valve has 1/4 and 5/16 John Guest fittings for the outlet lines and a 1/4 compression fitting for the inlet line.

Easy Part #:: EAP16226572

Availability:: In Stock

Price:: $76.66

Grease filter (filter, grease)

The grease filter is intended for use with some downdraft cooktops and ranges to collect grease particles in the air from cooking. The grease filter is silver in color, approximately 15 1/2” long and almost 6 1/4” wide. As per the manufacturer, the original filter may have been a 1/2” wider, but it should not be a problem and will still function the same. The grease filter is sold individually and is a genuine OEM part.

Easy Part #:: EAP11743870

Availability:: In Stock

Price:: $26.10

Lower rack (rack asm final lower)

The lower rack provides easy loading with flexibility for small and large items, and helps hold the dishes in place during the wash and dry cycle. The rack measures approximately 20.48 X 21.99 and the wheels are included with the rack. This is a genuine OEM part and is white in color.

Easy Part #:: EAP17137102

Availability:: In Stock

Price:: $178.97

Infinite burner switch (infinite burner switch - large element - 240v)

This surface burner switch controls the stove top 8-inch surface burner temperature. This switch is 240-volt, 2100-2600 watt, and 8.8-10.8 amp. If your element is not defective but will not heat, you may need to replace the switch. This burner switch is a genuine OEM part. It is recommended to disconnect the power to your range before you start your repair.